Rain Bird Female In-Line Valve 1 In. 150 Psi

This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 3/4 in. or 1 in. female threaded inlets and outlets. It can be used with any 24 volt AC irrigation timer. Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water. This valve can be used with all types of watering devices including Rain Bird spray heads and rotors as well as Drip zones when properly installed together with a pressure regulator and filter. Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve’s external bleed screw.

Easy-to-turn, pressure assisted flow control mechanism

Heavy duty construction with stainless steel screws

Buna-N diaphragm offers superior performance in harsh water environments

Reliable and non-clogging design

Reverse flow design reduces stress on diaphragm for dependable operation

In-line design minimizes pressure loss of dirt and debris during installation and system start-up

Operates automatically or manually with manual bleed screw

Works with any standard sprinkler timer

Designed for below-ground installation, out of sight and away from playful hands

Energy efficient, low power encapsulated solenoid with captured plunger